Voer een woord of zin in in een taal naar keuze 👆
Taal:
Vertaling en analyse van woorden door kunstmatige intelligentie ChatGPT
Op deze pagina kunt u een gedetailleerde analyse krijgen van een woord of zin, geproduceerd met behulp van de beste kunstmatige intelligentietechnologie tot nu toe:
- hoe het woord wordt gebruikt
- gebruiksfrequentie
- het wordt vaker gebruikt in mondelinge of schriftelijke toespraken
- opties voor woordvertaling
- Gebruiksvoorbeelden (meerdere zinnen met vertaling)
- etymologie
Wat (wie) is wedge sprue - definitie
CHANNEL THROUGH WHICH LIQUID MATERIAL ENTERS A MOLD, OR EXCESS MATERIAL THAT SOLIDIFIES IN SUCH A CHANNEL AND IS LATER REMOVED
Sprue (casting); Sprue (molding)
Wedge (footwear)
SHOE WITH A HIGH HEEL INTEGRAL WITH THE SOLE
Wedge boot; Wedge boots; Platform wedge; Wedge heel; Wedge heels; Wedge shoe
Wedge boots, wedgies, or lifties are shoes and boots with a sole in the form of a wedge, such that one piece of material, normally rubber, serves as both the sole and the heel.
Wedge (border)
![U.S. Army Corps of Topographical Engineers]] showing the wedge and features surrounding the boundary line.](https://commons.wikimedia.org/wiki/Special:FilePath/Map of wedge maryland pennsylvania delaware 1850 survey corps of engineers.png?width=200 "U.S. Army Corps of Topographical Engineers]] showing the wedge and features surrounding the boundary line.")
AREA OF DELAWARE
Delaware wedge; The Wedge (border)
The Wedge (or Delaware Wedge) is a tract of land along the borders of Delaware, Maryland and Pennsylvania. Ownership of the land was disputed until 1921; it is now recognized as part of Delaware.
Sprue (manufacturing)
A sprue is the vertical passage through which liquid material is introduced into a mold and it is a large diameter channel through which the material enters the mold. It connects pouring basin to the runner.
Wikipedia
Sprue (manufacturing)
A sprue is the vertical passage through which liquid material is introduced into a mold and it is a large diameter channel through which the material enters the mold. It connects the pouring basin to the runner. In many cases it controls the flow of material into the mold. During casting or molding, the material in the sprue will solidify and need to be removed from the finished part. It is usually tapered downwards to minimize turbulence and formation of air bubbles.
